Mold Inspector Certification Training · 6 hours
Mold Inspector Certification for Prevention, Remediation, and Removal Training
A professional-level, self-paced course aligned with IAC2 Mold Inspection Standards of Practice: mold biology, inspection tools, sampling procedures, interpreting lab results and writing defensible reports. Provides training and a certificate of completion.
- 6 hrsSelf-paced
- $329.99Per seat
- CEU 0.6Continuing ed.
- 36 monthsCertificate validity
Course overview
This 6-hour, self-paced course trains aspiring mold inspectors, home inspectors adding mold services, environmental consultants, facility managers and remediation professionals in IAC2-aligned inspection methodology: how to examine a building, form and test hypotheses, take air and surface samples, interpret laboratory results and write a clear, defensible report.
Neither EPA nor OSHA regulates indoor mold levels or sets sampling thresholds. That gap is exactly why method matters. Inspectors who follow a recognized standard of practice, document their reasoning and explain the limits of sampling produce reports that clients, remediation contractors and insurers can rely on. This course explains how inspectors operate within that regulatory gap.
The course runs across eight modules and twenty-two lessons, from mold biology and health hazards through building science, tools and PPE, sampling, reporting, containment and clearance, and the documents every inspector should keep. It ends with a final exam.
Learners earn a certificate of completion valid for 36 months and 0.6 CEU. The course is aligned with IAC2 Mold Inspection Standards of Practice but does not itself confer IAC2 accreditation or third-party certification of the individual. Training is delivered through HAZWOPER OSHA Training, LLC.
Who it's for
Take this course if you are
A residential or commercial home inspector adding mold services, an environmental health and safety professional, a facility or building manager, a remediation contractor, or a real estate professional entering mold inspection.
Consider another course if
You're general staff needing basics (see Mold Awareness Training), or a property manager needing operational-level training (see Property Management Mold Training).
Not a substitute for
Third-party professional certifications such as IICRC AMRT, NORMI CMA/CMR or ACAC CMR, or a state mold license where your state requires one.
What you'll be able to do
- Understand mold characteristics and health effects, and comprehend the IAC2 Mold Inspection Standards of Practice.
- Perform a visual examination of a building to identify mold and the conditions required for growth.
- Use the IAC2 Mold Sampling Decision Chart and understand proper use of tools, equipment and PPE.
- Develop hypotheses, apply building-science and moisture knowledge, and use sampling devices and procedures correctly.
- Interpret laboratory results and write clear, professional, defensible inspection reports.
- Understand mold remediation techniques, best practices and preventive strategies.
Course outline
Eight modules and twenty-two lessons, taken in sequence, followed by a final examination.
01Module 1: IAC2 Mold Inspection Standards2 lessons
Structure, purpose and application of the Standards, and inspector responsibilities.
- Types of Mold Inspections
- IAC2 Mold Inspection Standards
02Module 2: Understanding Mold and Mold Hazards2 lessons
Mycotoxins, organic dust toxic syndrome (ODTS), hypersensitivity pneumonitis and protective equipment.
- What is Mold?
- Negative Health Effects and Mold
03Module 3: Exploring Mold Growth3 lessons
Why mold grows where it does and how to find it.
- What Mold Needs to Grow
- Building Science and Mold
- Finding Mold in Buildings
04Module 4: Mold Inspection Tools and PPE3 lessons
The instruments and protection an inspector relies on.
- Mold Inspection Tools
- Sampling Devices
- Personal Protective Equipment
05Module 5: Mold Sampling Procedures3 lessons
When and how to sample, starting with a hypothesis.
- Hypotheses
- Air Sampling
- Surface Sampling
06Module 6: Mold Inspection and Reporting3 lessons
Carrying out the inspection and communicating the findings.
- Steps of a Mold Inspection
- Interpretation of Lab Results
- Mold Inspection Report
07Module 7: Containment, Remediation and Prevention5 lessons
What happens after the inspection, and how clearance is confirmed.
- Mold Containment Methods
- Mold Remediation
- Remediation Guidelines
- Remediation Clearance Inspection
- Preventing Mold Growth
08Module 8: Mold Inspection Documents1 lesson
The vital documents mold inspectors must maintain for thorough, professional assessments.
Final exam
A final knowledge check covering all eight modules. You must pass it to receive your certificate of completion.
How a professional mold inspection works
A defensible inspection is a process, not a test kit. The course follows the sequence inspectors use in the field:
- Interview and scope. Learn the client's concerns, the building's history, past water events and occupant symptoms, and agree on what the inspection will and won't cover.
- Visual examination. Walk the building systematically, looking for visible growth, staining, odors and the moisture conditions that support mold.
- Moisture assessment. Use moisture meters, hygrometers and thermal imaging to find wet materials and explain where the water is coming from.
- Form a hypothesis. Decide what you're trying to prove or rule out before choosing whether to sample.
- Sample when it answers a question. Air and surface samples, including outdoor controls, collected and handled correctly.
- Interpret and report. Read lab results in context, state limitations, and give clear recommendations for moisture correction and remediation.
Practice the concepts in our free mold inspection process and sampling and testing lessons.
Do you need a state mold license?
There is no federal mold inspector license, but a few states regulate mold work. Florida, Texas and New York, for example, require state licensing for mold assessors or remediators. Training like this course can be part of your preparation, but it doesn't replace a state license where one is required.
Before you offer paid mold inspection services, check our state mold training requirements guide and confirm the current rules with your state agency.
Exam, certificate and format
Exam
A final examination follows the eight modules. You must pass it to receive your certificate.
Certificate
Certificate of completion, downloadable as a PDF and issued immediately when you pass. Valid 36 months before a refresher is recommended.
Format
100% online and self-paced, with audio narration. Stop and resume on any device.
Languages
English and Spanish, switchable inside the course.
Standards
Aligned with IAC2 Mold Inspection Standards of Practice. No federal OSHA, EPA or CDC threshold standards exist for airborne mold; the course explains how inspectors work within that gap.
Continuing education
0.6 CEU.
Verification
Employers and clients can confirm any certificate with the certificate verification tool using the certificate ID.
See a sample certificate: this course runs on HAZWOPER OSHA Training's platform, which issues the certificate. View the course and a sample certificate on HAZWOPER-OSHA.com.
Team and bulk pricing
Buying for a crew or a whole company? Choose the number of seats at checkout and the per-seat price drops automatically. Each seat covers one learner, and every learner earns their own certificate.
Bulk per-seat pricing applies automatically at 2-10, 11-20, 21-50, 51-100, and 101-250 seats. For more than 250 seats, call 1-866-429-6742. Need SCORM for your LMS, virtual instructor-led or in-person group training? See other formats or call 1-866-429-6742.
What students say
Testimonials from students of this course, collected on our training partner's course pages.
“This is one comprehensive course for mold inspection. I learned a lot!”
“I'm glad I took this mold inspection certification training course. I feel more prepared to take on my new role as a building manager.”
“This mold remediation certification has allowed me to effectively implement what I've learned within my workplace and offer guidance to my co-workers when necessary.”
Free resources for this course
Preview the topics with our free lessons, guides and tools. They don't issue a certificate, but they're a good way to prepare.
Compare courses
Frequently asked questions
The course is developed in line with the IAC2 Mold Inspection Standards of Practice. There are currently no federal OSHA, EPA or CDC standards for acceptable levels of airborne mold, and this course explains how inspectors operate within that regulatory gap.
A certificate of completion, issued immediately after passing the final exam, downloadable as a PDF. It is valid for 36 months before a refresher is recommended.
Start with IAC2-aligned mold inspection training like this course, which covers inspection methodology, sampling, lab-result interpretation and report writing. Some states, including Florida, Texas and New York, also require a separate state license to work as a mold inspector professionally; check our state requirements guide before offering paid inspection services.
Yes. This course is 100% online and self-paced, so you can complete the 8 modules and final exam on your own schedule, on any device.
6 hours total, spread across 8 modules and 22 lessons, followed by a final examination. Because it's self-paced, you can complete it in one sitting or across several sessions.
No. The course is aligned with IAC2 Mold Inspection Standards of Practice and provides training and a certificate of completion. It does not itself confer IAC2 accreditation or third-party certification of the individual.
Yes. Per-seat pricing includes bulk discounts at higher seat counts, and the course can be delivered as a SCORM package to your company's LMS. See our corporate and bulk mold training page.
Mold biology and health effects, building science, inspection tools and PPE, sampling procedures (air and surface), interpreting lab results, writing defensible inspection reports, containment and remediation basics, and required inspection documentation.
Upon successful completion, students receive a certificate of completion. It documents training and may support employer compliance files, internal training records or continuing education needs. It does not itself guarantee third-party certification unless expressly stated by the applicable certifying body. EPA does not certify mold inspectors or remediation firms, and OSHA does not issue mold-specific certifications.
Build real mold inspection skills
6 hours online. Certificate of completion. English & Spanish. $329.99 per seat.
