Both mold and mildew are fungi, and both grow where there's moisture. "Mildew" is an informal name for certain molds that grow flat on surfaces, usually in a thin powdery or downy layer. In buildings, the practical difference is where it grows and how deep it goes.
Side by side
| Mildew | Mold (problem growth) | |
|---|---|---|
| Look | Flat, powdery or downy; white, gray, yellowish or black specks | Fuzzy, slimy or blotchy; black, green, brown, white or other colors |
| Where | On the surface of non-porous or sealed surfaces: shower grout, tile, window sills, painted surfaces in damp rooms | On and inside porous materials: drywall, ceiling tile, wood, carpet, insulation |
| Depth | Stays on the surface | Can grow into the material |
| Cleanup | Usually wipes or scrubs off with detergent and water | Porous materials often need removal and replacement |
| Smell | Mild musty odor | Often a stronger musty, earthy odor |
Quick checks
- Wipe test: if it wipes off cleanly with a damp cloth and detergent and the surface underneath is sound, it's likely surface mildew.
- Comes back fast: if it returns within days, there's ongoing moisture to fix.
- Material is soft, stained or damaged: growth is probably in the material, not just on it.
- Look beyond the spot: check behind and under fixtures, and nearby walls, for water damage.
Don't rely on color. "Black mildew" on shower grout and dark growth on a water-damaged wall can look similar; the difference is the material and the moisture behind it. See black mold facts.
Health and cleanup
From a health standpoint, both can trigger allergy and asthma symptoms in sensitive people, and CDC advises removing indoor mold regardless of type. For cleanup:
- Surface mildew: ventilate, wear gloves and eye protection, scrub with detergent and water, rinse and dry. Replace moldy caulk. See shower mold.
- Mold in porous materials: remove and bag the affected material, fix the moisture, and follow EPA's guidance for areas over about 10 square feet. See the remediation process.
- Never mix bleach with ammonia or vinegar.
Stop both at the source
- Run exhaust fans during and after showers; make sure they vent outdoors.
- Keep indoor humidity below 60%, ideally 30 to 50%.
- Fix leaks within 24 to 48 hours.
- Improve air flow around cold walls and windows.
Sources and official references
Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.
