# moldtraining.us/guides/how-to-test-for-mold/: agent-readable view

How to Test for Mold in a House, and When You Don't Need To (free guide)
summary     How to test for mold in a home or building: when testing is worth it, DIY kits vs. professional sampling, air vs. surface tests, what results mean, and what EPA and CDC recommend.

sections
- Start with your eyes and nose
- Do you need a test?
- When testing is worth it
- DIY kits vs. professional sampling
- Reading results
- What to do after testing

faq
Q: How do you test for mold in a house?
A: Start with a visual and odor inspection, a moisture meter and a hygrometer. If testing is needed, such as for hidden mold or clearance after cleanup, a qualified professional collects air samples with an outdoor control and surface or bulk samples, analyzed by an accredited lab.
Q: Do I need to test for mold if I can see it?
A: Usually not. EPA says sampling is generally unnecessary when mold growth is visible, and CDC doesn't recommend routine testing. Remove the mold and fix the moisture.
Q: Are home mold test kits accurate?
A: Open-dish settle plate kits almost always grow mold because spores are everywhere, and they don't measure concentration, so they rarely tell you whether you have a problem. Tape or swab kits sent to a lab can confirm whether a specific spot is mold.
Q: Is there a safe level of mold in the air?
A: No federal standard exists. EPA notes that no EPA or other federal limits have been set for mold or mold spores, so results are interpreted by comparing indoor and outdoor samples and considering the whole inspection.

note        Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.

Courses delivered by HAZWOPER OSHA Training, LLC, an IACET Accredited ProviderDelivered by an IACET Accredited Provider

Leer en espaƱol

Free Guide

How to Test for Mold in a House, and When You Don't Need To

Testing sounds like the obvious first step, but EPA and CDC say it usually isn't. Here is when mold testing is worth paying for, how it's done, and how to read the results.

  • 7 min read
  • Updated October 25, 2026
On this page
  1. Start with your eyes and nose
  2. Do you need a test?
  3. When testing is worth it
  4. DIY kits vs. professional sampling
  5. Reading results
  6. What to do after testing
  7. FAQ

Start with your eyes and nose

Before you spend money on a test, do a careful visual and odor inspection: look for growth, water stains, peeling paint and warped materials; follow musty odors; and check under sinks, around windows, in basements, attics and crawl spaces. A moisture meter finds wet materials, and a hygrometer shows humidity. See what mold looks like.

Do you need a test?

  • EPA: "In most cases, if visible mold growth is present, sampling is unnecessary." There are no EPA or other federal limits for mold or spores, so a test can't show you meet a standard.
  • CDC: doesn't recommend routine testing, because reactions vary by person, good sampling can be expensive, and there are no standards for acceptable levels. Remove the mold and fix the moisture.

When testing is worth it

  • You smell mold but can't find it, and want help locating hidden growth.
  • You need clearance after remediation, to help confirm the area was cleaned.
  • A real estate, insurance or legal situation requires documentation.
  • A health professional has asked for an environmental assessment.

DIY kits vs. professional sampling

OptionWhat it tells youLimits
Settle plate kits (open dish)Something grew, which almost always happensNo volume or concentration; spores are everywhere, so results are rarely meaningful
DIY tape or swab kits with lab analysisWhether a visible spot is mold and its typeOnly tells you about that spot
Professional air samplingSpore concentration and types indoors vs. an outdoor controlA snapshot; needs expert interpretation
Professional surface and bulk samplingGrowth on or in materialsRequires knowing where to sample

EPA recommends using professionals with specific experience designing mold sampling protocols, and labs that follow methods from groups like AIHA or ACGIH. Look for labs accredited under AIHA LAP's EMLAP.

Reading results

  • Compare indoor to outdoor samples taken at the same time.
  • Look at types as well as totals; indoor-dominant types or water-damage indicators can suggest an indoor source.
  • Don't treat a single number as "safe" or "unsafe": there are no federal standards.
  • Results support decisions; they don't replace fixing the moisture and removing visible growth.

What to do after testing

Whatever the result, the actions are the same: fix the water problem, remove the growth safely, dry materials, and keep humidity low. Learn the details in sampling and testing.

Sources and official references

Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.

FAQ

Frequently asked questions

Start with a visual and odor inspection, a moisture meter and a hygrometer. If testing is needed, such as for hidden mold or clearance after cleanup, a qualified professional collects air samples with an outdoor control and surface or bulk samples, analyzed by an accredited lab.

Usually not. EPA says sampling is generally unnecessary when mold growth is visible, and CDC doesn't recommend routine testing. Remove the mold and fix the moisture.

Open-dish settle plate kits almost always grow mold because spores are everywhere, and they don't measure concentration, so they rarely tell you whether you have a problem. Tape or swab kits sent to a lab can confirm whether a specific spot is mold.

No federal standard exists. EPA notes that no EPA or other federal limits have been set for mold or mold spores, so results are interpreted by comparing indoor and outdoor samples and considering the whole inspection.

Need Documented Mold Training?

Mold Awareness, Property Management and Mold Inspector courses. Certificate of completion. English & Spanish.