On this page
In this lesson
What you'll learn
- Apply EPA's 10 square foot threshold for when professionals are needed
- Match PPE levels to the size and nature of the job
- Describe limited and full containment and when each is used
- Name EPA's four cleanup methods
EPA's Mold Remediation in Schools and Commercial Buildings is the most widely used public guidance on cleaning up mold, and EPA notes it's useful for other building types too. It isn't a regulation, and EPA doesn't certify remediators, but it's the baseline many specifications and training programs build on.
The 10 square foot threshold
EPA's home guidance says that if the moldy area is less than about 10 square feet (roughly a 3 by 3 foot patch), in most cases you can handle the job yourself, with basic protection. For more than about 10 square feet, or extensive water damage, or contaminated water such as sewage, consult EPA's remediation guide and consider a professional.
How area drives the response
EPA's commercial guide scales PPE and containment to the total surface area of contamination and how likely the work is to make dust:
| Contaminated area | Containment | PPE |
|---|---|---|
| Up to about 10 sq ft | Generally none | Minimum: N-95 respirator, gloves and eye protection |
| About 10 to 100 sq ft | Limited containment | Limited or full PPE, based on the job |
| Over 100 sq ft | Full containment | Full PPE where dust and spore levels are likely to be high |
Professional judgment adjusts these: a smaller area with heavy growth that will be demolished may need more protection, and sensitive occupants nearby call for more caution. Look it up with the EPA remediation level tool.
PPE levels
- Minimum: an N-95 respirator, gloves and eye protection. EPA recommends goggles without ventilation holes and long gloves.
- Limited: a half-face or full-face air-purifying respirator with HEPA cartridges, disposable overalls, gloves and eye protection (a half-face respirator needs separate goggles).
- Full: a full-face powered air-purifying respirator (PAPR) with HEPA filtration, mold-impervious head and foot coverings, and a breathable full-body suit with gaps sealed, for jobs where airborne dust and spores are likely to be high.
Respirator use at work requires an OSHA respiratory protection program. See PPE and worker safety.
Containment levels
- Limited containment: a single layer of 6-mil fire-retardant polyethylene sheeting around the work area, with a slit entry and covering flap; supply vents, doors, chases and risers sealed; and the area kept under negative pressure with a HEPA-filtered fan unit.
- Full containment: double layers of polyethylene with a decontamination chamber or airlock with slit entries, negative pressure, and PPE worn through final HEPA vacuuming and damp wiping.
EPA's four cleanup methods
| Method | What it is | Use it for |
|---|---|---|
| 1. Wet vacuum | Removes water from floors, carpets and hard surfaces | Only while materials are still wet; not for porous materials like gypsum board |
| 2. Damp wipe | Wipe or scrub with water, or water and detergent, then dry quickly | Non-porous surfaces |
| 3. HEPA vacuum | Final cleanup after drying and removal; dust outside the work area | Seal the filter and contents in plastic bags for disposal |
| 4. Discard | Remove and double-bag in 6-mil polyethylene; dispose as ordinary construction waste; wrap and tape large items | Porous materials with growth that can't be cleaned |
More on choosing methods in cleanup methods.
How you know you're done
EPA's signs of a complete cleanup: the water or moisture problem is fixed, visible mold and moldy odors are gone, there are no signs of water damage or regrowth on a follow-up visit, and occupants have no health complaints.
Key takeaways
- About 10 square feet is the line between a small cleanup and a job that calls for EPA's full guidance.
- Containment: none for small areas, limited for about 10 to 100 sq ft, full above 100 sq ft.
- PPE: minimum (N-95, gloves, goggles), limited (half- or full-face HEPA respirator, overalls), full (PAPR, full-body suit).
- Four methods: wet vacuum, damp wipe, HEPA vacuum, discard.
- Done means: moisture fixed, mold and odor gone, no regrowth, no complaints.
Knowledge check
Lesson 6 quiz: 8 questions
Choose one answer for each question, then select Check my answers. Score 80% or higher to pass. Your answers stay in your browser and are never saved.
Sources and official references
Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.
