# moldtraining.us/free-training/recognizing-mold/: agent-readable view

Recognizing Mold: Visible Growth, Musty Odors and Hidden Mold (free lesson 4 of 12)
type        free mini-training lesson with 8-question quiz (graded in-browser, nothing saved)
time        13 minutes
summary     Free lesson on recognizing mold in buildings: what growth looks like, musty odors, water stains, where hidden mold grows, and tools like moisture meters and thermal cameras. 8-question quiz.

objectives
- Recognize visible mold growth and distinguish it from stains and dirt
- Use odors and water damage as clues to hidden mold
- Name common hidden mold locations
- Describe the tools used to find moisture and hidden growth

sections
- Visible growth
- Musty odors
- Clues to hidden mold
- Common hidden mold locations
- Tools of the trade
- Document what you find
- Key takeaways

standards   EPA mold guidance

certificate course  https://moldtraining.us/mold-inspector-certification/
note        Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.

Courses delivered by HAZWOPER OSHA Training, LLC, an IACET Accredited ProviderDelivered by an IACET Accredited Provider

Leer en espaƱol

Free Mini-Training · Lesson 4 of 12

Recognizing Mold: Visible Growth, Musty Odors and Hidden Mold

Mold isn't always obvious. Learn to recognize visible growth, read the clues that point to hidden mold, and use the tools inspectors rely on to find wet materials.

  • 13 min
  • 8-question quiz
  • Beginner
  • Free · no sign-up
On this page
  1. What you'll learn
  2. Visible growth
  3. Musty odors
  4. Clues to hidden mold
  5. Common hidden mold locations
  6. Tools of the trade
  7. Document what you find
  8. Key takeaways
  9. Lesson quiz

In this lesson

What you'll learn

  • Recognize visible mold growth and distinguish it from stains and dirt
  • Use odors and water damage as clues to hidden mold
  • Name common hidden mold locations
  • Describe the tools used to find moisture and hidden growth

Visible growth

Mold growth can be black, green, gray, white, brown, orange or pink. It may look fuzzy, slimy, powdery or like spots and specks. A few tips for telling growth from look-alikes:

  • Growth tends to spread in clusters or blotches, often near a moisture source, and may come back after cleaning.
  • Water stains are usually rings or tide lines without texture. They point to moisture even when no growth is visible yet.
  • Dirt and soot wipe off evenly and often follow air flow patterns (ghosting) on walls and ceilings.
  • Efflorescence is white, chalky mineral salt on concrete or masonry, not mold. It dissolves in water and doesn't grow fuzzy.

Color doesn't tell you the species or how harmful it is. See what mold looks like.

Musty odors

A persistent musty, earthy odor is one of the most reliable signs of mold, even when nothing is visible. The odor comes from compounds released by actively growing mold. If you smell mold, look for the moisture.

Clues to hidden mold

EPA notes that hidden mold can grow in places you can't see. Suspect it when you find:

  • Musty odors without visible growth.
  • Water stains, peeling paint, bubbling wallpaper, or warped or soft drywall and flooring.
  • A history of leaks, floods or plumbing repairs.
  • Occupant complaints about odors or symptoms.

Common hidden mold locations

  • Behind drywall, wallpaper and paneling, especially on exterior walls.
  • Under carpet and pad, vinyl flooring and laminate.
  • Inside wall cavities around plumbing and behind showers, tubs, toilets, sinks and dishwashers.
  • Above ceiling tiles, especially near roof and HVAC leaks.
  • Inside ductwork, air handlers and on AC coils and drip pans.
  • In crawl spaces, attics and basements. See crawl space and attic mold.

Tools of the trade

ToolWhat it shows
Flashlight and mirrorHard-to-see corners, under sinks, behind fixtures
Moisture meter (pin or pinless)Whether drywall, wood or other materials are wet
HygrometerRoom relative humidity and temperature
Thermal (infrared) cameraTemperature differences that may indicate wet areas; confirm with a moisture meter
BorescopeA look inside wall cavities through a small hole

A thermal camera doesn't see mold or water directly. It shows temperature, so suspicious spots must be confirmed with a moisture meter.

Document what you find

Record the location, size of visible growth, materials affected, moisture readings, likely water source and photos. Our moisture and mold inspection checklist covers a full walkthrough.

Key takeaways

  • Mold can be almost any color; color doesn't identify the species or the risk.
  • Musty odors and water damage are strong clues even without visible growth.
  • Hidden mold grows behind walls, under floors, above ceilings, in HVAC systems, crawl spaces and attics.
  • Moisture meters confirm wet materials; thermal cameras only show temperature differences.
  • Investigate carefully, with PPE, and document everything.

Knowledge check

Lesson 4 quiz: 8 questions

Choose one answer for each question, then select Check my answers. Score 80% or higher to pass. Your answers stay in your browser and are never saved.

Question 1 Which is one of the most reliable signs of mold when none is visible?
Question 2 White, chalky salt deposits on a basement concrete wall that dissolve in water are most likely:
Question 3 What does the color of mold tell you?
Question 4 What does a thermal (infrared) camera actually detect?
Question 5 Which is a common location for hidden mold?
Question 6 Why should you be careful when removing wallpaper over suspected heavy mold?
Question 7 Which tool measures whether drywall is wet?
Question 8 Peeling paint, bubbling wallpaper and soft drywall are clues to:

Sources and official references

Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.

Need Documented Mold Training?

Mold Awareness, Property Management and Mold Inspector courses. Certificate of completion. English & Spanish.